 |
Never allow the packer to rest in an upright position as this may cause damage to the end fixtures and fittings.
|
 |
Never allow the pneumatic pipe attached to the flexible packer to become trapped or twisted.
|
 |
Never inflate the flexible packer when it is not inserted into a pie for repair (except for periodic maintenance and inspection at low pressure, as detailed in user instructions).
|
 |
Do not bend the packer over sharp corners or flex it to such an extent that it becomes difficult to push/pull into position.
|
 |
Do not allow the packer to be abraded against hard surfaces or sharp edges, or to drag against the ground when moving/positioning
|
 |
Always ensure that the packer is positioned horizontally and that the pneumatic hose attached is free from kinks and sharp changes in direction.
|
 |
Always position a packer with the aid of a work colleague.
|
 |
Position the packer from above ground wherever possible, ensuring that it doesn’t get damaged. Take care to avoid dragging the packer over sharp edges or corners.
|
